Complete 2hp 1800rpm AC motor and drive package.
KB Electronics KBAC-27D AC motor control 9520, and North American Electric PR56CH2M4A General Purpose AC motor. This package comes complete with motor, drive, forward-brake-reverse switch, On/Off switch, and wiring kit.
This motor/drive package is great for knife making, belt sanders, 2x72 grinders, drill presses, and much more!
Product Manual
KBAC-27D Hybrid AC Drive, A Digital Drive with Analog Interface
Rugged Die-Cast Aluminum NEMA-4X/IP-65 Enclosure with hinged cover.
Primary Features:
Horsepower 1/8 to 2 HP, Jumper Selectable
1Ø Input 115/230 VAC, 50/60 Hz
3Ø Output 230 VAC
Start/Stop Switch
200% Starting Torque
Diagnostic LED Status Indicators
Additional Features:
Sensorless Flux Vector Control
Electronic Inrush Current Limit (EICLTM) Protection
Run/Fault Relay Output Contacts
Holding Torque at Zero Speed in "Stop" mode
Undervoltage and Overvoltage Protection
Short Circuit Protection, phase to phase
Ride-Through momentary power loss
Regeneration eliminates tripping
Basic, Programmable, Trimpot Adjustments
Drive Options:
On/Off AC Line Switch,
Forward-Stop-Reverse Switch
Signal Isolator, Auto/Manual Switch
Class "A" (CE) RFI Filter,
Liquid Tight Fittings
Dimensions approx. 9.8" X 7.6" X 7.3".
Agency approvals: UL, CE, CSA, C-Tick.
North American Electric PR56CH2M4A general purpose ENERGY EFFICIENT AC Motor:
Specs:
2HP
1800RPM
56C Frame
TEFC
230/460V
3PH
60HZ
GENERAL PURPOSE
5/8" shaft
Wiring Kit
(x1) NEMA 5-15R/5266 AC male cord cap
(10') 2 Wire + Ground 14 AWG SO Cable
(3') 3 Wire + Ground 14 AWG SO Cable
(x4) Wire Nut (Yellow)
Wiring Kit
(x1) NEMA 5-15R/5266 AC male cord cap
(10') 2 Wire + Ground 14 AWG SO Cable
(3') 3 Wire + Ground 14 AWG SO Cable
(x4) Wire Nut (Yellow)
(x2) Cable Gland/Strain Relief ½”
(x1)Cable Gland/Strain Relief ¾”
(x2) Lock Nut ½”
(x1) Lock Nut ¾”
(x2) Ring Terminal
Customer Reviews
Based on 1 review
Write a review